The NeoCree Adapter is used to turn a pixel saber into a combat-ready saber illuminated by a high-power LED (baselit). In addition, you need a blade that can be illuminated by an LED (standard/baselit blade). To do this, the NeoCree adapter is pushed into the blade holder with the circuit board facing downwards. The blade is also pushed into the handle and fixed in place. To do this, the blade must exert pressure on the NeoCree Adapter.
The NeoCree Adapter can be pushed 5 mm deep into a standard 1" blade (1/16" wall thickness) to minimise the space required, provided the light-conducting foil at the bottom is also shortened by 5 mm. If this is not the case, the enclosed 3D-printed one can simply be plugged onto the NeoCree Adapter.
The NeoCree Adapter contains a high-power LED with RGB configuration, which reproduces the behaviour of the first pixel in the pixel blade. Since the HPLED-illuminated blade (unlike the pixel blade) does not contain any electronics, the saber is thus suitable for combat.
Technical specifications:
- dRGrB configuration (deep red, green, royal blue).
- compatible with sabers and PCBs of all manufacturers
- for 1" blade holder
- large copper heat sink for optimal cooling
- built-in 55k Ohm resistor between Data and Gnd
- operation at maximum permissible current (approx. 1000 mA)
- height: 20.5 mm
- Weight: 39 g